SMD Simple ElectroMagnetic Electronic Buzzer Element 9.6*9.6*5.0MM

Quick Detail:

1. Size: L9.6mm*W9.6*H5.0mm
2. Rated Voltage: 5VDC
3. Operating Voltage: 4-7VDC
4. Rated Current: Max. 30mA at 5VDC
5. SPL: Min.85dB at 10cm Input 5VDC
6. Resonant Frequency: 2700+/-300Hz Continuous

Description:

1. buzzer
2. SMD Electro-Magnetic Buzzer
3. SMD Electro-Magnetic Element
4. 5V Buzzer

Specification:

1. Technical Parameter

Measuring condition

Part shall be measured under a condition (Temperature: 535, Humidity: 45%85%R.H., Atmospheric pressure: 860 1060hPa) unless the standard condition (Temperature: 25±3, Humidity: 60±10%R.H. Atmospheric pressure: 860 1060hPa) is regulated to measure.

       

*Housing Material: Black PPS

Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

(1)Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

(2)High Temperature Test

The part shall be capable of with standing a storage temperature of +80 for 96 hours.

(3)Low Temperature Test

The part shall be capable of with standing a storage temperature of ­-30 for 96 hours.

(4)Humidity Test

Temperature:+40±3   Relative Humidity:90%95% Duration: 48 hours

and expose to room temperature for 6 hours

(5)Temperature Shock Test

Temperature:70 /1hour→ 25/3hours→-30/1hour→ 25/3hours (1cycle)

Total cycle: 10 cycles

(6)Drop Test

Standard Packaging From 75mm(Drop on hard wood or board of 5cm thick,

three sides, six plain.)

(7)Vibration Test

Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes

Note:

As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it.

3.Electrical And Acoustical Measuring Condition

Recommended Test Circuit

Recommended Setting

 Mr. Johnson Jiang
Marketing manger
Tel: 86-519-83822009
Fax: 86-0519-83822007
Mobile: 86- 150 6112 9182

Contact to this supplier