PPS Micro 14MM 5V SMD Piezo Electric Buzzers , 80 dB Black

Quick Detail:

1. Size: D:14mm*H6.5mm
2. Rated Voltage: 5VDC
3. Operating Voltage: 4-7VDC
4. Rated Current: Max.10mA at 5VDC
5. SPL: Min.80dB at 10cm Input 5VDC
6. Resonant Frequency:4000+/-500Hz Continuous

Description:

1. buzzer
2. SMD Electro-Magnetic Buzzer
3. SMD Electro-Magnetic Element
4. 5V Buzzer

1. Technical Parameter

Measuring condition

Part shall be measured under a condition (Temperature: 535, Humidity: 45%85%R.H., Atmospheric pressure: 860 1060hPa) unless the standard condition (Temperature: 25±3, Humidity: 60±10%R.H. Atmospheric pressure: 860 1060hPa) is regulated to measure.

*Housing Material: Black PPS

Surface mounting condition

(1)Reflow soldering

Recommendable reflow soldering condition is as follows.

Note:

1. In automated mounting of the SMD sound transducers on PCB, any bending, expanding and pulling forces or shocks against the SMD sound transducers shall be kept minimum to prevent them from electrical failures and mechanical damages of the devices.
2. In the reflow soldering, too high soldering temperatures and too large temperature Gradient such as rapid heating or cooling may cause electrical failures and mechanical damages of the devices.

(2)Soldering pattern

 Reliability Test

After any following tests the part shall meet specifications without any degradation in

appearance and performance except SPL. SPL shall not deviate more than -10 dB

from the initial value

(1)Ordinary Temperature Life Test

The part shall be subjected to 96 hours at 25±10. Input rated voltage

Resonant frequency, 1/2 duty Square wave.

(2)High Temperature Test

The part shall be capable of with standing a storage temperature of +80 for 96 hours.

(3)Low Temperature Test

The part shall be capable of with standing a storage temperature of ­-30 for 96 hours.

(4)Humidity Test

Temperature:+40±3   Relative Humidity:90%95% Duration: 48 hours

and expose to room temperature for 6 hours

(5)Temperature Shock Test

Temperature:60 /1hour→ 25/3hours→-20/1hour→ 25/3hours (1cycle)

Total cycle: 10 cycles

(6)Drop Test

 Mr. Johnson Jiang
Marketing manger
Tel: 86-519-83822009
Fax: 86-0519-83822007
Mobile: 86- 150 6112 9182

Contact to this supplier